Monday, April 23, 2012

PN Junction Diode. Animation

(Image: PN Junction Diode)

Consider a P type material and N type material are brought together to form a PN Junction Diode.

Free electrons on the N-side and free holes on the P-side can initially wander across the junction. When a free electron meets a free hole it can 'drop into it'. So far as charge movements are concerned this means the hole and electron cancel each other and vanish.

As a result, the free electrons and holes near the junction tend to eat each other, producing a region depleted of any moving charges. This creates what is called the depletion zone.

Now, any free charge which wanders into the depletion zone finds itself in a region with no other free charges. Locally it sees a lot of positive charges (the donor atoms) on the n-type side and a lot of negative charges (the acceptor atoms) on the p-type side. These exert a force on the free charge, driving it back to its 'own side' of the junction away from the depletion zone.


The negative charge of the acceptor's extra electron and the positive charge of the donor's extra proton (exposed by it's missing electron) tend to keep the depletion zone swept clean of free charges once the zone has formed.

A free charge now requires some extra energy to overcome the forces from the donor/acceptor atoms to be able to cross the zone. The junction therefore acts like a barrier, blocking any charge flow (current) across the barrier.

The energy required by the free holes and electrons can be supplied by a suitable voltage applied between the two ends of the pn-junction diode. This voltage is called Barrier Voltage.

In the figure, Red dots represents the Holes and he Blue dots represents the Electrons.
Here the connection is Forward Bias. When the Switch is closed, the charge carriers start crossing the Depletion Zone.

This voltage must be supplied the correct way around, this pushes the charges over the barrier. However, applying the voltage the 'wrong' way around makes things worse by pulling what free charges there are away from the junction!

This is why diodes conduct in one direction but not the other.


(Courtesy: www.st-andrews.ac.uk)

3 comments:

  1. Expansion of concept with words with annimation could help a new learner who start learning this topic.

    ReplyDelete
  2. Thank you for your comment Karthik..

    Keep watching the other posts also..you will get what you want..

    keep watching...

    Best regards...
    Chithra.s

    ReplyDelete
  3. Sure Karthik, I will explain it in the same post itself...

    ReplyDelete

Thank you for your valuable suggestion. If you feel this post useful, please share our Blog with others!!! Comments just for Backlinking your Website or Blog will be Deleted...